How to Calibrate One Touch Ultra 2: A Step-by-Step Guide
Calibrating your One Touch Ultra 2 is a crucial step to ensure accurate readings and optimal performance of your glucose monitor. This guide will walk you through the process step-by-step, helping you achieve the best results and better manage your health. Remember, always consult your healthcare professional for personalized advice.
Before we dive into the calibration process, ensure you have the following: your One Touch Ultra 2 meter, test strips,Kalibrated blood glucose control solution, a timer, and your test strip codingchart.
Understanding the One Touch Ultra 2 Calibration Process
The One Touch Ultra 2 needs to be calibrated initially and periodically to maintain its accuracy. Calibration involves using a control solution to set the meter's readings to match a known value. This ensures the meter's accuracy and your peace of mind.
Your One Touch Ultra 2 comes pre-calibrated, but it's essential to check and calibrate it yourself as soon as possible after removing the protective tab from the test strip port.
Initial Calibration
Performing the initial calibration is vital before using your One Touch Ultra 2 for the first time. Follow these steps:
1. Open the test strip port by lifting the lid. 2. Insert the coding chip from the test strip vial into the coding chip slot. 3. Place a test strip in the test strip port. 4. Use the sample roller to mix the Kalibrated control solution with the strip. 5. Wait for the time indicated on your meter and then read the result. 6. Compare the result with the one shown on your meter. If they match, proceed to step 7. If not, recalibrate using the other set of control solution.
Recalibration
Over time, your One Touch Ultra 2 may require recalibration. Recalibration is recommended every 3 to 6 months or if you encounter unexpected readings. Here's how to do it:
1. Turn on your meter and insert a test strip. 2. Fill the strip with the Kalibrated control solution and wait for the indicated time. 3. Read the result and compare it with the expected value. If both values match, proceed to step 4. If not, recalibrate again using the other set of control solution.
4. If the meter is correct, calibrate it by following the on-screen instructions. Make sure to record the calibration date and expiration date of the control solution in your log book.
Troubleshooting: What if my One Touch Ultra 2 Won't Calibrate?
If your One Touch Ultra 2 fails to calibrate after multiple attempts, there might be an issue with your meter or test strips. Here are a few troubleshooting tips:
1. Check the test strips: Ensure you're using test strips from an unexpired vial and that they're not damaged.
2. Inspect the control solution: Make sure the control solution is not expired and has been stored correctly.
3. Clean the test strip port: Wipe the port with a damp cloth to remove any dirt or debris.
4. Contact One Touch Customer Service: If none of the above solutions work, do not hesitate to reach out to One Touch Customer Service for personalized assistance.
Regularly calibrating your One Touch Ultra 2 is vital to ensure accurate readings. By following this guide, you'll be well-equipped to manage your diabetes effectively. Keep an eye on your meter's calibration needs and enjoy the peace of mind that comes with accurate monitoring.