Mastering Lippert Leveling: Easy Steps to Calibrate Your System
Ever found yourself struggling to park your RV or trailer perfectly level?annoyed with a campsite that's anything but flat? Lippert's innovative electric leveling system can save your back and time, ensuring a seamless and secure setup. Here's a comprehensive guide on how to calibrate and use your Lippert LevelUp or LCI Bigfoot electric leveling system.
Before we dive in, ensure you've read the user manual. Safety first! This guide assumes you're familiar with basic RV and trailer operations. Let's get started, leveling experts!
Understanding Lippert's Electric Leveling System
First, grasp how the system works. Lippert's electric leveling systems use hydraulic actuators that extend or retract to level your RV or trailer. The system's brain, a smart control module, communicates with four height sensors located at the wheels.
Don't confuse these with the tire pressure monitoring sensors (TPMS). Lippert's height sensors measure the distance between the wheelframe and the ground, sending real-time data to the control module. It's this info that helps the system level your rig automatically or with your manual intervention.
Preparation and Initial Setup
Check System Components
Ensure all components are secure and functional: height sensors, actuators, control module, remote control, and any accessories like the manual override kit.
Positioning for Calibration
Park on an even, firm surface for initial calibration. The ground should be dry to avoid sensor malfunctions.
System Calibration: LevelUp and Bigfoot Step-by-Step
Before starting, ensure your rig is level in all directions. This means your RV or trailer is on an even surface, with no notable slopes or hills.
Now, let's dive into the calibration process, which might vary slightly between LevelUp and Bigfoot systems.
Calibrating a Lippert LevelUp System
Switch On and Display Check
Turn the ignition on or engage your RV's house batteries. The control module should display "CAL" on the remote or main control panel.
Calibration Procedure
With the system displaying "CAL", simultaneously press and hold the "UP" and "DOWN" arrows on the remote until the display reads "CAL OK".
Calibrating a Lippert LCI Bigfoot System
Switch On and Setup
Turn the ignition on or engage your RV's house batteries. Ensure the remote control is paired and switched on.
Calibration Procedure
With the remote in your hand, press and hold the "CAL" button until the display reads "CALibration". Release the button, and the system will automatically calibrate.
Congratulations! You've successfully calibrated your Lippert Leveling system. Always re-calibrate after moving your RV or trailer to a new campsite to ensure accuracy.
Using Your Electric Leveling System
Getting Started
Turn your ignition on or engage your RV's house batteries. Press the "UP" or "DOWN" arrows on your remote until the system begins leveling.
Manual Intervention
In case the automatic leveling isn't cutting it, use the "UP", "DOWN", "LEFT", and "RIGHT" arrows to manually level each corner. It's as easy as that!
Kudos! You're now a pro at using and calibrating Lippert electric leveling systems. Enjoy your perfectly level camping adventures. But remember, prevention is better than cure; always check your system's health before cruising off to your next destination. Safe travels!