How to Accurately Calculate Backsplash Square Footage for Your Kitchen or Bathroom
Calculating the square footage of your backsplash is a crucial step before purchasing tiles or starting your project. It helps ensure you order the right amount of materials and avoid costly overshoots or undershoots. Here's a step-by-step guide to calculate backsplash square footage with ease.
Before diving into the calculations, ensure you have the following measurements on hand: the height and width of the wall where your backsplash will be installed. Let's break down the process into simple, manageable steps.
Finding Your Backsplash Dimensions
Start by measuring the width and height of the wall where you'll install your backsplash. Multiply these two dimensions to find the total square footage of the wall.
However, backsplashes typically don't cover the entire wall. They usually span the area from the countertop up to a certain height, typically 16 to 36 inches. The exact height depends on your personal preference and the layout of your kitchen or bathroom.
Measuring the Height of Your Backsplash
Using a tape measure, determine the height from your countertop to the desired top of your backsplash.
To accommodate cabinets or other obstacles, you might need to install your backsplash in sections. Measure each section independently to ensure accurate calculations.
Calculating the Width of Your Backsplash
The width of your backsplash will be the same as the width of your wall, as it typically spans the entire width from one side to the other.
However, if you're installing a backsplash around a corner or in a unique shape, you might need to divide the wall into sections and measure each section's width separately.
Calculating Square Footage of Each Section
Now that you have the height and width of each backsplash section, multiply these two dimensions to find the square footage of each section.
For example, if your backsplash section is 18 inches high and 120 inches wide, the square footage would be (18 inches * 120 inches) / 144 square inches per square foot, equalling 15 square feet.
Accounting for Vertical Joints
If your backsplash design incorporates vertical joints between tiles, you'll need to factor these into your calculations.
Vertical joints are typically 1/8 or 1/16 of an inch wide. Divide the width of your backsplash section by the width of your tiles (including the joint) to find out how many tiles fit across horizontally. Multiply this number by the height of your backsplash section to find the total square footage.
Accounting for Horizontal Cuts
If you need to make horizontal cuts to fit your backsplash around obstacles or edges, these cuts will result in partial tiles. You'll need to account for these cuts in your calculations.
Measure the width of each cut tile and use these measurements instead of the full tile width for your calculations. This will help you determine the exact number of tiles you need for each section.
Calculating Total Square Footage
Once you have the square footage for each backsplash section, add these numbers together to find your total backsplash square footage.
This total will help you determine the number of tiles you need to purchase. Remember to factor in a 10-15% overage for cuts, breaks, and waste.
Now that you know how to calculate backsplash square footage, you're one step closer to transforming your space. Happy measuring and tiling!