how to bypass lid lock on maytag washer

Bypass Maytag Washer Lid Lock: Simple Steps

By Richard Clark
AD

Ever found yourself in a bind with your Maytag washer's lid lock engaged without your permission? You're not alone. This safety feature, while necessary, can sometimes be a hinderance. Here's a step-by-step guide on how to bypass the lid lock on your Maytag washer, ensuring a smooth operating experience.

First, let's understand why your washer's lid lock is activated. It's most likely due to an imbalance in the spin cycle or an obstacle in the washer's path. This is your machine's way of preventing accidents and damage. Bypassing the lid lock should only be done when you're sure the washer is safe to operate.

Identifying the Cause

Before attempting to bypass the lid lock, it's crucial to identify the cause. Here are two common reasons and how to address them.

AD
Maytag Washer Lid Lock Bypass Guide & Tips - Machine Answered
Maytag Washer Lid Lock Bypass Guide & Tips - Machine Answered
7 Steps to Maytag Washer Lid Lock Bypass in 2024
7 Steps to Maytag Washer Lid Lock Bypass in 2024
HOW TO BYPASS THE LID LOCK ON A MAYTAG TOP LOAD WASHING MACHINE ( TUTORIAL )
HOW TO BYPASS THE LID LOCK ON A MAYTAG TOP LOAD WASHING MACHINE ( TUTORIAL )

Spin Cycle Imbalance

If the washer suspects an imbalance in the spin cycle, it engages the lid lock. To resolve this, distribute the laundry more evenly. Remove large items like bedding or towels, then redistribute the clothes to ensure they're evenly balanced.

After evenly distributing the laundry, try restarting the cycle. If the lid lock engages again, it might be due to a different reason, and you may need to proceed with the next step.

Maytag Washer Lid Lock Bypass | How to Bypass a Washer Lid Switch
Maytag Washer Lid Lock Bypass | How to Bypass a Washer Lid Switch
Maytag Washer Lid Lock Not Working (Reset/Bypass) - Ready To DIY
Maytag Washer Lid Lock Not Working (Reset/Bypass) - Ready To DIY

Obstacle in the Washer's Path

Sometimes, the lid lock is activated because the washer senses an obstacle. This could be anything from a small toy left in a pocket to a coin mistakenly thrown in with the laundry. To remove the obstacle, stop the cycle and carefully check the washer's interior.

Once the obstacle is removed, restart the cycle. If the lid lock engages again, it may be time to bypass the lid lock.

AD

Bypassing the Lid Lock

If you've addressed the likely causes and the lid lock is still engaged, it's time to bypass it. Remember, this should only be done when you're certain the washer is safe to operate. Here's how:

Bypassing the Lid Lock on Front Load Maytag Washers

1. **Disconnect the Power**: First, ensure the safety of the process by disconnecting the washer from its power source. Unplug the washer or turn off the circuit breaker.

2. **Access the Control Panel**: Remove the screws from the control panel's bottom to access the control board. If your washer has a touchpad, you might need to access this through the bottom panel.

AD

3. **Locate the Lid Lock Relay**: The lid lock relay is usually marked. It's the one responsible for activating the lid lock. Bridge the two terminals with a screwdriver or a piece of wire. This should bypass the lid lock.

4. **Test the Bypass**: Plug the washer back in or turn the circuit breaker back on. The lid lock should now be bypassed, allowing you to open the lid. However, if the washer still doesn't recognize the bypass, you might need to take a different approach.

Bypassing the Lid Lock on Top Load Maytag Washers

1. **Locate the Lid Lock Solenoid**: The lid lock solenoid can usually be found under the washer's lid. It's a small cylinder with two wires connected to it.

AD

2. **Disconnect the Solenoid**: Carefully disconnect the solenoid's wires. This should bypass the lid lock. If the washer still doesn't recognize the bypass, you may need to tests the solenoid for continuity.

Remember, if you're not comfortable performing these steps, it's always best to call a professional. DIY repairs can void your washer's warranty and potentially cause more damage if not done correctly.

Finally, always double-check that your Maytag washer is safe to operate after bypassing the lid lock. If the washer still senses an imbalance or obstacle, it's crucial to address the issue to prevent damage or accidents. Staying aware of your washer's needs can help prevent these situations in the future. Happy washing!

AD