how to build an arena drag

Build an Arena Drag: A Step-by-Step Guide

By James Jones
AD

Building an arena drag, a high-speed racing event where drivers compete in a figure-eight pattern, combines thrill with strategy. Whether you're planning a local event or a major spectacle, this guide will walk you through creating a safe, exciting, and spectator-friendly arena drag.

First, understand that arena drags aren't just races; they're attractions. They demand careful planning, from track design to safety measures to spectator experience. Let's dive into the details, making sure your event is fast, fun, and unforgettable.

Track Design and Layout

The heart of your arena drag is its track. It should be wide enough for side-by-side racing and long enough to reach high speeds safely.

AD
a piece of metal is laying in the dirt
a piece of metal is laying in the dirt
2.1K reactions · 100 shares | It also took less than two days work of work! Products used: 4x posts 50x step in post 6x rolls of barrier tape from Amazon – I had some leftover 2x electric fence connector thingies that I used for the “gate” | Talia’s Mustangs | Facebook
2.1K reactions · 100 shares | It also took less than two days work of work! Products used: 4x posts 50x step in post 6x rolls of barrier tape from Amazon – I had some leftover 2x electric fence connector thingies that I used for the “gate” | Talia’s Mustangs | Facebook
How to Make an ATV Drag / Harrow for Farm & Ranch (Gannon box, Scraper, Arena drag)
How to Make an ATV Drag / Harrow for Farm & Ranch (Gannon box, Scraper, Arena drag)

Ideally, use a figure-eight design with two long straights, two tight turns, and a hairpin turn for the tightest part of the figure-eight. This layout offers a mix of high-speed racing and precision driving, making for exciting races.

Track Dimensions

Typical arena drag tracks range from 1,500 to 2,500 feet (457 to 762 meters) in length, depending on the size of your venue. The key is finding a balance between speed and safety.

How To Build a Nail Drag
How To Build a Nail Drag
ATV/UTV and implement setups, what to get? Pics of yours?
ATV/UTV and implement setups, what to get? Pics of yours?

A common design features a 700-foot (213-meter) straight, followed by a 200-foot (61-meter) radius turn, a 600-foot (183-meter) straight, a 100-foot (30-meter) radius hairpin turn, and then the final 700-foot straight.

Track Surfaces

Choose a track surface that balances speed, grip, and safety. Asphalt provides high speeds but requires proper drainage and maintenance. Gravel or dirt tracks are usually cheaper to build and maintain but may limit top speeds.

AD

Consider the vehicles racing, too. Most arena drag events use street-legal cars, so the track should accommodate their varied tire types and traction needs.

Safety Measures

Safety is paramount in high-speed racing. Implement several measures to protect drivers and spectators alike.

First, provide adequate run-off areas beyond track boundaries, allowing vehicles to safely slow down and stop in case of an accident. Line these areas with impact-absorbing barriers for added safety.

AD

Safety Barriers

Install impact-absorbing barriers along the entire track. These should be able to withstand the impact of high-speed crashes while minimizing damage to vehicles and protecting drivers.

Use tires or other soft barriers along the inside edges of turns and at the ends of straights. For further protection, consider using gravel traps in high-risk areas like the hairpin turn.

Emergency Services

Have adequate medical personnel and emergency vehicles on-site. Establish designated clear paths for quick access to the track in case of an emergency.

AD

Mandate the use of safety equipment like fire-resistant suits, helmets, and safety harnesses for all drivers. Impose strict rules for vehicle preparation, such as fuel tank reinforcement and proper battery placement to minimize fire risks.

Event Organization

Once your track is set up, focus on organizing a smooth-running event.

A clear understanding of the rules, registration process, and timeline is key. Hire experienced staff to run the events, and involve volunteers to help with tasks like parking, spectator management, and vendor coordination.

Pitting and Staging

Designate a pitting area for drivers to prepare their vehicles, with easy access to tools, fuel, and other necessities. Have a separate staging area where drivers wait for their race, keeping it organized and safe.

Consider using a lounge area for competitors to relax, chat, and share stories. This enhances the social aspect of the event, fostering a sense of community among racers.

Spectator Experience

Excited spectators drive the spirit of arena drags. Create a spectator-friendly environment with clear sightlines, easy access to food, drinks, and restrooms, and family-friendly activities.

Set up seating areas around turns and straights, focusing on safety and visibility. Use public address systems to provide commentary and keep the crowd engaged. Consider offering VIP or VIP experiences for a enhanced viewing and dining options.

Building an arena drag is a complex but rewarding task. With meticulous planning, focus on safety, and attention to detail, you'll create an event that thrills drivers and spectators alike. So, rev up your engines and let the races begin!

AD