how to build a smitty sled

"How to Build a Smitty Sled: Step-by-Step Guide"

By Jessica Walker
AD

Are you ready to channel your inner Paul Bunyan and build your own classic smitty sled? This timeless, utilitarian design has been a staple in recreation and transportation for generations. Let's dive into the step-by-step process of crafting your very own smitty sled, perfect for gliding through the snow.

This comprehensive guide will walk you through the process, from gathering materials to the final finish. So, grab your toolbelt and let's embark on this rewarding DIY journey.

Gathering Materials and Tools

Before you start, make sure you have everything you need. A well-stocked workshop will make your build smoother and more enjoyable.

AD
How To Build A \
How To Build A \
How to Build a Smitty Sled - Easy Basic Collapsible DIY Design
How to Build a Smitty Sled - Easy Basic Collapsible DIY Design
25 Homemade DIY Sled Projects To Slide This Winter Season
25 Homemade DIY Sled Projects To Slide This Winter Season

A typical smitty sled consists of a single, wide, flat piece of wood, so your material list is straightforward. Here's what you'll need:

  • One piece of ¾" or 1" thick plywood (8' x 4' sheet should suffice)
  • Two pieces of 2" x 4" pressure-treated or cedar lumber (8' long each)
  • 2½" outdoor wood screws
  • 1½" outdoor wood screws
  • Wood glue
  • Sandpaper (80-, 120-, and 220-grit)
  • Waterproofing sealant (optional)

Tools Needed

You'll also need the following tools to bring your sled to life:

How To Build A \
How To Build A \
Easy DIY Smitty Sled Anyone Can Build In An Afternoon
Easy DIY Smitty Sled Anyone Can Build In An Afternoon
  • Circular saw
  • Drill with driver bits
  • Jigsaw
  • Orbital sander
  • Tape measure
  • Pencil
  • Level
  • Clamps

Designing Your Sled

Once you've gathered your materials and tools, it's time to decide on the size and shape of your sled. The classic smitty sled is roughly 6' long by 2' wide, but feel free to customize it to your preferences.

Consider the following dimensions as a starting point, and adjust as needed:

AD
  • Length: 6' (72")
  • Width: 2' (24")
  • Handle height: 24" (adjust this based on your preferred pulling height)

Cutting the Plywood

Using a circular saw, cut the plywood sheet to your desired length and width. Ensure you're cutting along the grain for added strength.

If you want a curved sled, use a jigsaw to create your desired curve along one of the width edges. Sand down any rough edges with 80-grit sandpaper.

Building the Handles

Cut the 2" x 4" lumber into two pieces, each 24" long. These will serve as the sled's handles.

AD

Mark the center point of each handle piece and draw a line from there to the edge to create a 45-degree angle. This will allow the handles to sit flush with the top of the sled. Cut out the angles using a circular saw or jigsaw.

Assembling the Sled

Now that you have your main sled body and handles, it's time to put them together.

First, apply wood glue to the cut angles of the handles. Position them along the width edges of the plywood, 12" in from the ends. Ensure the handles are level and perpendicular to the sled. Clamp them in place and let the glue set according to the package instructions.

AD

Securing the Handles

Drill pilot holes through the handle into the sled body, then countersink them. Screw the handles into place using 2½" screws. Add an additional screw further down the handle for added support.

Attach the remaining piece of 2" x 4" along the remaining width edge of the sled, flush with the bottom. This will serve as a runner to keep the sled from tipping over. Secure it with 2½" screws spaced every 6-8".

Finishing Touches

Use 120- and 220-grit sandpaper to smooth any rough edges on your sled. Apply a waterproofing sealant to protect your sled from the elements. This is an optional step, but it will help extend the life of your handiwork.

Once dry, take your new smitty sled out for a spin. Enjoy the fruits of your labor as you glide effortlessly through the snow.

As you Experienced the joy of building your own classic smitty sled, consider passing on this timeless tradition to the next generation. Who knows? You might even start a new family tradition of building sleds together. So, grab some hot cocoa, bundle up, and happy sledding!

AD