"Mac Boot Enter Recovery Mode & Open Disk Utility
macOS is renowned for its intuitive interface and robust features, but sometimes, you may need to delve into its internals to perform maintenance tasks. One such task is booting your Mac into Disk Utility, a powerful tool for managing your system's drives. Here's a step-by-step guide on how to do this, along with some troubleshooting tips.
Before we dive in, ensure you're aware that booting into Disk Utility allows you to perform operations like formatting, partitioning, and repairing drives. Proceed with caution, as these actions can permanently erase data or alter your system's configuration.
Booting into Mac's Disk Utility
macOS provides two main methods to boot into Disk Utility: via Recovery Mode, and using the Terminal. We'll explore both below.
Method 1: Using Recovery Mode
This method is suitable if you can still boot into your macOS, or if you're using a freshly-installed System disk.
First, restart your Mac. Immediately after pressing the power button, hold down Command (⌘) + R until the spinning globe appears. This will boot your Mac into Recovery mode. Once booted, you'll see a spinning globe on your screen. Wait for a few minutes while the system loads.
Method 2: Using Terminal
This method is useful when your Mac doesn't boot into the macOS, or you can't access Recovery Mode.
To use this method, you'll need another working Mac with Disk Utility and a USB flash drive. Follow these steps to create a Recovery Partition:
- Connect the USB flash drive to the working Mac.
- Open Disk Utility, select the USB drive, and click 'Erase'.
- Format the USB drive with a name like 'Recovery', and set the format to 'macOS Extended (Journaled)' or 'APFS' based on your system. Click 'Erase' to confirm.
- Once done, click 'Done' and eject the USB drive.
- Now, connect the USB drive to your non-bootable Mac and restart it while holding down Command (⌘) + Option + R. This should boot your Mac into the Recovery Partition on the USB drive.
Navigating and Using Disk Utility
Once booted into Disk Utility, you'll find a clean, straightforward interface. On the left, you'll see a list of your system's drive(s). Here's what you can do:
Formatting a Drive
If you wish to format a drive, select it, click 'Erase' at the top of the screen. Give it a name, choose a format, and click 'Erase' to confirm. Remember, formatting will erase all data on the drive.
Repairing a Drive
To repair a drive, select it, then click 'First Aid' at the top. Click 'Run' to start the process. If Disk Utility finds and repairs issues, it will tell you. If not, it may indicate that the drive is failing and needs to be replaced.
After performing the necessary operations, quit Disk Utility and restart your Mac. Upon restart, it should boot back into your macOS, provided you didn't make any drastic changes like formatting the System drive. If you face issues, consider using macOS Recovery or Apple Support for further troubleshooting.