how to bleed a oil burner

How to Bleed an Oil Burner

By David Martin
AD

Winter's chill often pushes us to rely heavily on our oil burners to keep our homes warm and cozy. However, like any mechanical device, these heating systems require routine maintenance to function efficiently. One such upkeep task is bleeding your oil burner, a process that might sound daunting but is actually quite manageable when you know the steps. Let's dive into a step-by-step guide on how to bleed an oil burner safely and effectively.

Before we proceed, it's crucial to understand that this process involves working with your home's heating system. If you're not comfortable with any of the steps or have any doubts, it's always best to consult a professional HVAC technician. Safety first, always!

Preparation: Gathering Tools and Safety Measures

The first step in bleeding an oil burner is ensuring you have all the necessary tools and safety equipment. This process might take some time, so it's best to set aside a few hours to complete it without interruptions.

AD
How to bleed an oil burner – Vortex Oil Boilers | Grant UK
How to bleed an oil burner – Vortex Oil Boilers | Grant UK
How to bleed oil burner how to restart the burner how to relight the furnace
How to bleed oil burner how to restart the burner how to relight the furnace
How to make an oil burner ❤️‍🔥 #ceramics #pottery #slabbuilt #handmade #clay #diy #homedecor
How to make an oil burner ❤️‍🔥 #ceramics #pottery #slabbuilt #handmade #clay #diy #homedecor

You will need:

  • A wet/dry vacuum
  • Glycerin
  • Rubber gloves
  • Eye protection
  • Rags or paper towels
  • Crow's foot wrench (usually 1/4" or 1/2")
  • Adjustable wrench

Safety Precautions

Prior to starting, ensure that your oil burner is turned off and allowed to cool down for at least 30 minutes. Next, ensure all electrical power to the burner is switched off at your home's circuit breaker. Lastly, do not smoke or use any open flames during this procedure. Oil vapors can be highly flammable.

Home Made WVO WMO Oil Burner
Home Made WVO WMO Oil Burner
The manufacturer doesn't want you to know this! Saving money
The manufacturer doesn't want you to know this! Saving money

Now that we've covered the basics, let's delve into the bleeding process itself.

Steps to Bleed an Oil Burner

Bleeding your oil burner involves releasing air trapped in the system, allowing oil to flow freely. This ensures your burner operates efficiently and reduces the likelihood of breakdowns during cold winter nights.

AD

Let's start by disconnecting the incoming oil line from the burner:

Disconnecting the Oil Line

Using your crow's foot wrench, carefully loosen the fitting connecting the oil line to the burner. This can sometimes be tight, so you might need to use an adjustable wrench as leverage. Once loose, use your hands to unscrew and remove the fitting completely.

You might see oil start to drip out. Place a bucket or large container underneath to catch any drips. Remember, oil is messy, so it's a good idea to wear old clothes or an apron during this process.

AD

Attaching the Wet/Dry Vacuum

Now, attach the inlet of your wet/dry vacuum directly to the opening of the oil line. Ensure there's a tight seal to prevent oil from leaking out. Most wet/dry vacuums come with attachments that can be used to suction oil.

The oil should start to suck out into the vacuum. If it doesn't, you can gently squeeze the oil line to push the oil out. Be careful not to kink or pinch the line, as this could potentially damage it.

Priming the Oil Burner

After the oil has been completely removed, it's time to prime the burner. This involves putting a small amount of oil back into the line to remove any remaining air bubbles.

AD

Using a syringe or a small medicine dropper, carefully Introduce glycerin into the oil line. The glycerin will help push any remaining air out. A few drops should suffice. If you don't have glycerin, you can use plain oil, although glycerin is more effective.

Reattaching the Oil Line

Once you're satisfied that most of the air has been removed, reattach the oil line to the burner. Tighten the fitting snugly using your crow's foot wrench, but be careful not to overtighten. You can use a wrench to ensure a tight seal, but again, be careful not to overtighten.

Remember, you can always tighten the fitting more if needed, but overtightening can damage the fitting or cause it to leak.

Testing the Oil Burner

Before turning the power back on, double-check that the oil line is securely attached and there are no leaks. Then, turn the valve that controls oil flow to your burner to the 'On' position. Allow oil to flow through the system for a few minutes to push out any remaining air.

Next, turn the power back on at your circuit breaker and fire up your oil burner. Listen for any erratic noises or signs of air in the system. If everything sounds normal, you've successfully bled your oil burner!

Regular bleeding of your oil burner can help prevent costly repairs and ensure your heating system runs efficiently. Always remember to perform this task when the system is cold and follow all safety precautions. If you ever feel unsure or run into issues, don't hesitate to contact a professional. Happy winter heating, and keep safe!

AD