how to attach walking foot

How to Attach a Walking Foot on Your Sewing Machine: A Step-by-Step Guide

By Christopher Jones
AD

Attaching a walking foot to your sewing machine is a simple yet transformative step that can greatly enhance your sewing experience, especially when working with heavyweight fabrics or multiple layers. This guide will walk you through the process, ensuring you attach it correctly and safely.

Before we dive into the details, understand that not all sewing machines are compatible with a walking foot. Check your machine's instruction manual to confirm compatibility. Once you've established that, let's proceed.

Gathering the Right Tools

A walking foot attachment comes with its own presser foot and a specific Chuck/Robert-like handwheel. You'll also need a screwdriver, usually a flathead, to remove the existing presser foot.

AD
How to Use a Walking Foot (Complete Sewing Machine Guide) TREASURIE
How to Use a Walking Foot (Complete Sewing Machine Guide) TREASURIE
How to install a walking foot
How to install a walking foot
How to attach a Janome walking foot
How to attach a Janome walking foot

Note that different models have unique attachment and removal procedures. Always refer to your sewing machine's instruction manual for specific steps. This guide provides a general overview that should apply to most machines.

Disassembling Your Sewing Machine

Begin by removing the existing presser foot. Typically, this involves lifting the presser foot lever, turning the screw counterclockwise, and sliding the presser foot off the presser foot bar.

Walking Foot Quilting Instructions
Walking Foot Quilting Instructions
Why, When and How to Use a Walking Foot for Sewing
Why, When and How to Use a Walking Foot for Sewing

Next, you'll need to remove the needle plate. This might require some fiddling with screws or levers, so consult your manual for your machine's specific method.

Removing the Needle Plate

The needle plate can be a bit temperamental. On some machines, you'll need to use a flathead screwdriver to lift a lever or turn a knob, while others might require removing screws first. Be gentle and patient.

AD

With the needle plate removed, you'll have access to the feed dogs, where you'll attach the walking foot. The feed dogs are the little teeth-like structures that help move the fabric through the machine.

Preparing the Walking Foot

Before attaching the walking foot, ensure the pressure bar is in the correct position. The pressure bar is the foot-like part of the walking foot that applies pressure to the top of the fabric. It should be parallel to the needle when in use.

Also, check that the handwheel (Chuck/Robert) is compatible with your sewing machine's handwheel. If not, you might need to purchase an adapter to ensure a proper fit.

AD

Attaching the Walking Foot

With the walking foot prepared, you can now attach it to your sewing machine. Start by aligning the walking foot with the feed dogs. The teeth on the walking foot should fit snugly over the feed dogs.

Once aligned, slide the walking foot onto the feed dogs and lower it into place. The walking foot's mount should rest on the sewing machine's bed, with the pressure bar extending forward towards the needle.

Securing the Walking Foot

Secure the walking foot in place by replacing the needle plate and ensuring it's properly aligned. Then, replace the presser foot, ensuring it's lined up properly with the walking foot. Tighten the screw clockwise to secure it in place.

AD

Finally, replace the presser foot lever and test the walking foot by turning the handwheel. The fabric should move smoothly and evenly as the walking foot works in conjunction with the feed dogs.

Testing the Walking Foot

For a final test, perform a few layers of stitches using different types of fabric. The walking foot should handle them smoothly, providing consistent results. If you notice any issues, double-check your installation and ensure all parts are secure and properly aligned.

With your walking foot now attached, you're ready to tackle those heavyweight fabrics and multiple layers with ease. Happy sewing!

AD