how to attach pvc pipe to cast iron

How to Attach PVC Pipe to Cast Iron

By Anthony Miller
AD

Connecting PVC to cast iron can seem like a daunting task, but with the right approach and tools, it's a straightforward process. This guide will walk you through the steps to attach PVC pipe to cast iron fittings securely and efficiently.

Before starting, ensure you have all the necessary materials and equipment: PVC cement, primer, cast iron coupling or union, PVC cement cleaner, sandpaper, steel wool, and a solid-revolution pipe cutter or hacksaw.

Preparation and Measurement

The first step involves measuring and cutting your PVC pipe to the desired length. Use a marker and a straight edge to mark the measurement, then cut the pipe using a solid-revolution pipe cutter or hacksaw.

AD
How to Tie PVC into Cast Iron Hub | Episode 11
How to Tie PVC into Cast Iron Hub | Episode 11
How to remove a lead joint form Cast iron drain and connect to pvc pipe
How to remove a lead joint form Cast iron drain and connect to pvc pipe
How to Connect Concrete Pipe to Cast Iron Pipe or PVC Pipe
How to Connect Concrete Pipe to Cast Iron Pipe or PVC Pipe

Once cut, deburr the pipe's interior and exterior edges to remove any sharp points that could potentially damage the piping system. This can be done using a deburring tool or sandpaper.

Cleaning the Pipes

Thoroughly clean both the PVC pipe and the cast iron fitting to ensure a strong bond. Use steel wool to gently scrape any rust or debris from the cast iron, then wipe it clean with a damp cloth.

Cast iron pipe to PVC using a Fernco Donut
Cast iron pipe to PVC using a Fernco Donut
How to Replace Cast Iron Pipe with PVC
How to Replace Cast Iron Pipe with PVC

For the PVC pipe, use PVC cement cleaner to remove any contaminants from the surface. Once cleaned, wipe the pipe with a clean cloth to remove any residue.

Applying Primer and Cement

Apply a utility knife or razor blade to remove any excess material that the steel wool may have left behind. Then, apply a coat of PVC primer to both the PVC pipe and the cast iron fitting, spreading it evenly around the surfaces that will be joined.

AD

Before the primer dries, apply a generous amount of PVC cement to both surfaces. Work quickly to ensure the cement doesn't dry before making the connection. Immediately after applying the cement, firmly push the PVC pipe into the cast iron fitting until the indicator marks on the coupling or union line up perfectly.

Assembly and Support

Hold the joint securely in place for about 30 seconds to allow the cement to begin setting. You can use a clamp or your hand to apply even pressure throughout the joint.

After holding the joint, support it with a simple piece of duct tape wrapped around the joint area. This additional support will help maintain the integrity of the bond while the cement cures fully over the next 24 hours.

AD

Inspecting and Testing the Joint

Once the cement has fully cured, inspect the joint for any signs of leakage. You can perform a pressure test by temporarily capping the other end of the pipe and applying water pressure to the system.

If no leaks are present, your PVC to cast iron connection is ready for use. Keep an eye on the joint over time, as changes in water pressure and temperature can react with the materials differently, potentially causing leaks in the future.

Regularly inspecting and maintaining your piping system will help extend the lifespan of your PVC to cast iron connections, ensuring optimal performance and minimal repairs over time.

AD
AD