Mastering Nuln Oil: A Step-by-Step Application Guide
Application of Nuln Oil, Games Workshop's iconic wash, is a vital step in the process of weathering and shading your miniatures, creating a realistic and aged look. It's a favorite among hobbyists for its versatility and ease of use. Let's dive into how to apply Nuln Oil to achieve the best results.
Before we start, ensure your miniatures are primed and the basecoat paint is fully cured. Applying Nuln Oil to wet paint or primer can lead to disappointment as it might cause the paint to come off. Also, it's best to work in a well-ventilated area as the solvent in Nuln Oil can be strong.
Understanding Nuln Oil
Nuln Oil comes in two variants: regular and glaze. The regular Nuln Oil is a stronger shade and is ideal for deep recesses, while the glaze is more subtle and is perfect for smoother surfaces.
Both variants are thinnable with water or a flow improver like Lahmian Medium, allowing you to adjust their consistency to best suit your needs.
Preparing Your Miniatures
Start by cleaning your miniatures to remove any dust or debris. This can be done with a soft brush or a damp cloth. Ensure there are no loose parts as Nuln Oil can seep into these areas and cause paint to chip off later.
Once clean, dry your miniatures thoroughly. Any moisture left on the surface can react with Nuln Oil and cause the paint to lift. Use a hairdryer on a low heat setting if necessary.
Applying Nuln Oil
Dip your paintbrush into the Nuln Oil, ensuring it's not too loaded. Remember, Nuln Oil works best when applied sparingly. Start from the top of your miniature, applying the wash to the edge of each panel or recess, allowing gravity to pull it down into the crevices.
Be careful not to apply too much oil, causing it to pool or run over the raised areas. If this happens, wipe off the excess immediately with a damp cloth or a paper towel.
Post-Application Care
After applying Nuln Oil, leave your miniatures to dry undisturbed. This could take anywhere from 5 to 30 minutes, depending on theenvironment and the amount of oil used. Patience is key here; rushing the process can cause the oil to smudge or the paint to lift.
Once dry, carefully inspect your miniatures for any missed spots or pooled oil. Use a dry brush to gently remove excess oil and touch up any areas where the paint has chipped. Seal your miniatures with a suitable varnish to protect the paint and the shading.
Final Touches
After sealing your miniatures, you can add highlights or drybrush for added depth. This will help tie the base colors back in with the shaded areas, creating a harmonious, weathered look.
Remember, model painting is a skill that improves with practice. Don't be disheartened if your first attempts aren't perfect. Keep experimenting with Nuln Oil, adjusting the application method and quantities to achieve the desired effect.
Happy painting, and may your Nuln Oil always flow smoothly!