how to adjust roller rockers sbc

Mastering SBC: Step-by-Step Guide to Adjusting Roller Rockers

By Emily White
AD

If you're a proud owner of a Small Block Chevy (SBC) engine and you've noticed a decline in performance due to worn out or misaligned roller rockers, it's time to reclaim your engine's power. Adjusting roller rockers on an SBC might seem daunting initially, but with the right guide, it's a manageable task that can breathe new life into your engine. Let's dive right in and explore how to adjust roller rockers on your SBC.

Before we begin, let's ensure you have the necessary tools: a breaker bar, a socket wrench, a torque wrench, a feeler gauge, and an adjustable wrench. Also, make sure your engine is cold to prevent any burns. Safety first, always!

Understanding Roller Rockers and Their Role

Roller rockers play a pivotal role in transferring motion from your engine's camshaft to the valves, regulating their opening and closing. They reduce wear and tear on the valves due to their hardened rollers, ensuring longevity. Understanding their role will help you in troubleshooting and fixing any issues you might face during the adjustment process.

AD
T And D Machine Sbc Shaft Rocker Arm Kit - 1.6/1.5 Ratio- 2150-160/150
T And D Machine Sbc Shaft Rocker Arm Kit - 1.6/1.5 Ratio- 2150-160/150
Penultimate LT1, Part 2: Finishing and Dyno Testing Our 396 Gen II
Penultimate LT1, Part 2: Finishing and Dyno Testing Our 396 Gen II
T And D Machine Sbc Shaft Rocker Arm Kit - 1.6/1.6 Ratio- 2300-160/160
T And D Machine Sbc Shaft Rocker Arm Kit - 1.6/1.6 Ratio- 2300-160/160

Now that we understand the importance of roller rockers, let's look at how to adjust them.

Locating and Accessing the Rocker Arms

Rocker arms are located on top of the cylinder heads, easily accessible after removing the valve covers. First, use your socket wrench to remove the bolts securing the valve covers. Then, gently pry the valve covers off, being careful not to damage the gaskets. Proceed with caution, as the under-hood environment can be messy!

Corvette Rocker Arms - Power at a Reasonable Price
Corvette Rocker Arms - Power at a Reasonable Price

Once you've removed the valve covers, you'll see the rocker arms, ready for inspection and adjustment.

Inspecting and Adjusting the Rocker Arms

Begin by removing the pushrods from their respective seats on the rocker arms. You can use an adjustable wrench to gently loosen and remove them. Next, use your feeler gauge to measure the clearance (lash) between the rocker arm and the valve stem. The ideal lash is typically around .015" to .020" depending on the application.

AD

For most SBCs, you can adjust the lash using the lock nuts and adjusting screws at the bottom of the rocker arm. Loosen the lock nut, and then turn the adjusting screw clockwise to decrease the lash or counterclockwise to increase it. Tighten the lock nut once you've achieved the desired lash. If your SBC has hydraulic lifters, you might need to perform this process with the engine at a specific crankshaft position.

Reassembling and Reinstalling the Valve Train

With the rocker arms properly adjusted, it's time to reinstall the valve train. Start by inserting the pushrods back into their seats on the rocker arms and the camshaft lobes. Ensure they're fully seated and retained properly.

Once the pushrods are in place, reinstall the valve covers, ensuring the gaskets are properly positioned and in good condition. Torque the valve cover bolts according to your specific SBC's recommendations, usually around 10-15 ft-lbs.

AD

There you have it! You've successfully adjusted the roller rockers on your SBC. Now, start your engine and enjoy the renewed performance. However, always double-check your work and consult professional assistance if needed. After all, a well-maintained SBC is a joy to drive and behold. Happy wrenching!

AD