how to adjust raceland coilovers

Mastering Your Ride: How to Adjust Raceland Coilovers for Perfect Setup

By Sarah Taylor
AD

Adjusting your Raceland coilovers can significantly impact your vehicle's ride height, handling, and appearance. With a few simple tools and some patience, you can achieve the perfect stance. Here's a comprehensive guide on how to adjust Raceland coilovers.

Before you begin, ensure your vehicle is safely supported by jack stands, and the wheels are off the ground. Additionally, familiarize yourself with the Raceland coilover construction, which usually involves an external reservoir, a main body, and a lower mounting point.

Understanding Raceland Coilover Adjustment

Raceland coilovers allow you to adjust both the height and the damping rate. The height adjustment is done by turning the lower part of the coilover, while the damping adjustment is typically located at the top of the main body.

AD
5 Tips For Coilover Adjustment and Installation
5 Tips For Coilover Adjustment and Installation
How to make coil over struts, affordably
How to make coil over struts, affordably
4-Link Rear Suspension for Air Ride and Coilovers
4-Link Rear Suspension for Air Ride and Coilovers

Raceland coilovers use a threaded sleeve that moves up and down when turned, allowing you to fine-tune your ride height. The damping adjustment, often marked with 'soft' and 'hard' indicators, controls the oil flow through internal valves, affecting the rebound and compression of your suspension.

Adjusting Ride Height

To adjust the ride height, first, loosen the lock nut at the bottom of the coilover. Then, turn the adjustment knob clockwise to lower the vehicle or counterclockwise to raise it. Tighten the lock nut once you've reached your desired height.

Double Adjustable Shocks | Drag Racing Shock Adjustments | Coilovers
Double Adjustable Shocks | Drag Racing Shock Adjustments | Coilovers
Coilovers & What You've Gotten Wrong
Coilovers & What You've Gotten Wrong

Remember, each full turn usually lowers the vehicle by about 20-30mm. Be patient and adjust gradually to avoid over-cranking, which can damage the coilover. Also, check all four coilovers for equal adjustment to maintain a balanced stance.

Adjusting Damping Settings

The damping adjustment is more complex but equally crucial. It affects how your vehicle handles bumps and turns. Start with the damper in the middle of its adjustment range, then drive your vehicle in various conditions to feel the difference.

AD

For more comfort, turn the adjuster toward the 'soft' setting. This increases the oil flow, providing a plusher ride but with less resistance to body roll during cornering. For stiffer handling, turn the adjuster toward the 'hard' setting to reduce body roll but potentially sacrificing some comfort.

Common Mistakes and Tips

One common mistake is adjusting the coilovers too quickly or without proper testing. Always start with small adjustments and thoroughly test your changes before making further tweaks.

Another mistake is forgetting to re-tighten the lock nuts. If they're not secure, your adjustments can slip, leaving you with an unwanted ride height or handling feel. Finally, always ensure your coilovers are free from significant debris or grime. Regular cleaning can prevent seizing and ensure longevity.

AD

With a bit of trial and error, you'll soon find the perfect combination of ride height and damping settings for your Raceland coilovers. Enjoy the process, and happy wrenching!

AD