how to adjust kickdown cable th350

Fix 1970s Chevy Truck Th350: Step-by-Step Kickdown Cable Adjustment

By Daniel Clark
AD

The 350 Transmission, known for its durability and robust design, may encounter issues with its kickdown cable over time. A malfunctioning kickdown cable can result in poor acceleration, making adjustments crucial for optimal performance. Adjusting the kickdown cable on your TH350 transmission can be done with the right knowledge and tools. Here's a step-by-step guide to help you troubleshoot and fine-tune your kickdown cable.

Before diving into the process, ensure you have the necessary tools: socket wrenches, pliers, a transmission kickdown cable adjust tool (if not available, you can MacGyver one using a bolt and nut), and a feeler gauge for setting the gap. Safety first – secure your vehicle on jack stands and engage the parking brake. Keep in mind, these adjustments are specific to the TH350 and may vary slightly for other transmissions.

Understanding the Kickdown System

The TH350 kickdown system comprises a cable connected to the carburetor linkage, which adjusts the engine's idle speed and provides correct low-speed, high-torque performance. The cable actuates when you press the accelerator pedal, signaling the transmission to engage lower gears.

AD
Turbo 350 Won't Downshift? Check & Adjust the Kickdown Cable
Turbo 350 Won't Downshift? Check & Adjust the Kickdown Cable
Hi-Tech Th350 Kickdown
Hi-Tech Th350 Kickdown
Th350 K-D Cable&brkt
Th350 K-D Cable&brkt

Notably, the kickdown cable adjusts automatically during transmission assembly. However, if the cable becomes misaligned or worn, you may need to readjust it. Now, let's proceed with the adjustment process.

Inspecting the Kickdown Cable Routing

Begin by inspecting the kickdown cable for any visible damage, kinks, or routing issues. The cable should run smoothly from the carburetor to the transmission, with no sharp bends or excessive wear. If the cable appears damaged, replacing it might be necessary before proceeding with the adjustment.

How to fix Frozen Throttle Cable , Brake Cable , Choke Cable on ATV Motorcycle Dirt bike
How to fix Frozen Throttle Cable , Brake Cable , Choke Cable on ATV Motorcycle Dirt bike
Polish. Hi-Tech Turbo 350 Kickdown cable
Polish. Hi-Tech Turbo 350 Kickdown cable

Check the cable's alignment with the transmission's kickdown lever. The cable should attach securely to the lever, with noplay or excessive slack. If the cable is improperly routed or detached, reattach and route it correctly before continuing.

Adjusting the Kickdown Cable

Now, let's dive into adjusting the kickdown cable. First, locate the transmission's kickdown lever, typically found on the driver's side of the transmission case. You should see a lock nut and an adjustment bolt near the lever's base.

AD

Using a socket wrench, loosen the lock nut slightly – about 1/4 to 1/2 turn. Tighten the adjustment bolt using your kickdown cable adjust tool (or your makeshift tool) until the cable pulls tight. Then, back off the bolt by one full turn. This should provide the proper cable tension for your TH350.

Recheck the cable's alignment with the kickdown lever and ensure it moves freely without binding. Tighten the lock nut securely to lock in your adjustments.

Fine-tuning the Kickdown Cable

To ensure optimal performance, fine-tune the kickdown cable's engagement point. Start the engine and let it idle, then shift through the gears to the highest – typically fourth or overdrive. With the engine in the highest gear, slowly press the accelerator pedal until you hear the transmission kick down to a lower gear.

AD

The kickdown point might be too sensitive if the transmission engages a lower gear at low throttle openings. Conversely, if you cannot achieve the kickdown at all, the cable might not be tensioned properly. To address these issues, readjust the cable by turning the adjustment bolt in small increments until you achieve the desired kickdown point – around 2/3 to 3/4 throttle opening.

Setting the Kickdown Gap

After achieving the optimal kickdown point, set the kickdown gap. This crucial step ensures the transmission shift fork engages correctly, promoting smooth shifting. To set the gap, first, shift into neutral and allow the engine to idle.

Using a feeler gauge, measure the gap between the kickdown lever and the shift lever. The ideal gap for a TH350 is between 0.030" and 0.040". If the gap is not within this range, adjust the kickdown cable as needed. Remember, small adjustments in the cable's tension can significantly impact the gap's width.

AD

Upon completing these steps, recheck the transmission's performance by driving it gently through various gear ranges. The kickdown should engage smoothly at the correct throttle opening, providing improved acceleration and overall drivability. If the transmission's performance has not improved, further troubleshooting or professional consultation may be required.

Regularly inspecting and maintaining your TH350 transmission's kickdown cable helps ensure longevity and optimal performance. With minimal effort and know-how, you can fine-tune this crucial component, enhancing your vehicle's drivability and ultimately enriching your driving experience.

Happy wrenching!

AD