how to adjust compound bow draw length

Mastering Your Bow: Step-by-Step Guide to Adjusting Compound Bow Draw Length

By Robert Lopez
AD

The draw length of a compound bow greatly impacts shooting accuracy and comfort. Adjusting it ensures the bow fits your arm length and provides the ideal balance of forgiveness and accuracy. Here's a step-by-step guide on how to adjust your compound bow's draw length for optimal performance.

Before beginning, understand that many modern compound bows come with an adjustable draw length range. Typically, this is between 26 to 31 inches, but it can vary. Always check your bow's manual to confirm its adjustable range and compatible methods.

Understanding Draw Length

Draw length is the distance from the nocking point on the bowstring to the front of the bow's riser when at full draw. It's crucial to match your bow's draw length to your arm length for comfortable and accurate shooting.

AD
How to adjust the draw length of a compound bow
How to adjust the draw length of a compound bow
How To Adjust Draw Length On A Compound Bow
How To Adjust Draw Length On A Compound Bow
How to Measure Draw Length
How to Measure Draw Length

To measure your draw length, extend your arms to your sides at shoulder height. Have a friend or measure the distance from the tip of your middle finger to the pivot point of your shoulder. This is your ideal draw length. If you're between sizes, it's generally better to choose the shorter length to accommodate growth or accommodate different layering of clothing.

Adjusting Draw Length

Modular Cams or Cables

Bows with modular cams or cables often have the simplest adjustment method. These bows usually have a hole or a marked area where you can change the draw length module or replace the cable with a longer or shorter one to achieve your desired draw length.

How to Measure Draw Length for a Compound Bow
How to Measure Draw Length for a Compound Bow
How to measure your archery draw length
How to measure your archery draw length

First, find the correct module or cable for your desired draw length. Remove the existing one and install the new one following the manufacturer's instructions. Always ensure you're using compatible parts to avoid damaging your bow.

Split Limb Bows

Split limb bows often have adjustable eccentric spinners on each limb. These spinners control the timing and the draw length. To adjust the draw length, follow these steps:

AD
  1. Unstring your bow for safety.
  2. Loosen the screws securing each eccentric spinner.
  3. Rotate the spinners to the desired draw length mark. Most spinners will have marks indicating draw length increments.
  4. Tighten the screws securely. Ensure both spinners are precisely aligned to maintain even tension.

Test the bow's performance after each adjustment. If the draw length feels significantly different, you may need to fine-tune the spinners or redo the adjustment.

Regularly checking and adjusting your bow's draw length ensures accuracy, longevity, and enjoyment. Your local archery pro shop or the bow manufacturer can provide further guidance tailored to your specific equipment. Don't hesitate to reach out for personalized advice to optimize your shooting experience.

AD