Step-by-Step Guide: How to Adjust Brake Shoes on Drum Brakes
Driving on unsafe or unreliable brakes can be an unsettling experience, and adjusting your brake shoes on drum brakes is an essential maintenance task that ensures your vehicle's braking performance. This guide will walk you through the process of adjusting your brake shoes, ensuring your safety and the longevity of your brake system.
Before we begin, it's crucial to understand when you might need to adjust your brake shoes. Some warning signs include a soft brake pedal, a grinding or squealing noise when braking, or the feeling that your car is pulling to one side while braking.
The Tools & Materials
To carry out this procedure, you'll need the following tools and materials:
- C রref Jack and Jack Stands
- Lug Wrench
- Adjustable Brake Shoe Tool
- Torque Wrench
- vise Grips (optional)
- New Brake Shoes (if replacing)
Safety First: Part Immobilization
Before making any adjustments, ensure your vehicle is safely immobilized.
1. Use a carjack and jack stands to raise your vehicle and safely support it. 2. Block your car's wheels to ensure it can't roll. 3. Engage the parking brake.
Inspect Your Brake Shoes
Before you begin, check the condition of your brake shoes. If they're severely rusted, glazed, or show signs of extreme wear, they may need replacing.
Worn Brake Shoes? If your brake shoes are significantly worn, it's a good idea to replace them. Keep in mind that even if only one shoe needs replacing, it's recommended to replace them in pairs to maintain even braking force.
Accessing Your Brake Shoes
To access your brake shoes, you'll need to remove the tires and wheels.
1. Use a lug wrench to remove the lug nuts, then lower the tire and wheel. 2. Support the tire with a jack, then completely remove the wheel using the lug wrench. 3. Remove the drum cover by preferably using a puller tool or a large screwdriver, taking care not to damage the fins on the backside.
Adjusting Your Brake Shoes
Now that you've accessed your brake shoes, it's time to adjust them. The specific procedure will vary depending on your vehicle's make and model, but the general steps follow:
1. **Push the Brake Pedal:** Push your brake pedal to extend the brake shoes against the brake drum. 2. **Using the Adjustable Tool:** Locate the brake shoe adjustment screw, usually found on the top or bottom of the brake shoe. Insert your adjustable brake shoe tool or use a screwdriver with the help of vise grips as a precaution against slippage. 3. **Turn the Screw:** Turn the screw clockwise to expand the brake shoes against the drum or counterclockwise to contract them. Use a careful touch, turning the screw a little at a time until the shoes barely touch the drum. 4. **Fine-Tune:** Now, test the adjustment by depressing the brake pedal a few times to ensure proper motion and sensitivity. You may need to fine-tune your adjustment, turning the screw more or less until you achieve the desired firmness. 5. **Reinstall the Drum:** Carefully replace the drum cover and reassemble your wheel.
Test Drive & Final Adjustments
After adjusting your brake shoes, take your vehicle for a short test drive to confirm their functionality.
1. **Within the First Mile:** within the first mile, you'll likely hear some noise as the brake shoes adjust to the new position and slight wear begins. 2. **After the First Mile:** After driving a mile, retighten the wheel lug nuts to the recommended torque using your torque wrench, usually between 80-100 ft-lbs. 3. **Final Adjustments:** If you find that your brakes still need adjustment after a few miles, you may need to access your brake shoes and perform fine-tuning again.
Adjusted brake shoes mean improved safety and peace of mind. Regularly check and adjust your brake shoes to ensure your vehicle's braking system is always in top shape. If you're unsure about any part of the process, consult your vehicle's owner's manual or consider taking your vehicle to a professional mechanic.
Stay safe out there, drivers. Happy wrenching!