How to Adjust Accutrigger: A Step-by-Step Guide
Adjusting your AccuTrigger, a product by TriggerTech, can significantly enhance the performance of your firearm by fine-tuning the trigger's pull weight and reset. A properly adjusted trigger not only improves accuracy but also enhances safety and user experience. Let's delve into the process of adjusting your AccuTrigger step-by-step.
Before you begin, ensure you have a safe, clean workspace and follow all firearms safety protocols. Also, have these tools ready: a small flathead screwdriver, a Allen wrench (usually included with the trigger), and optionally, a trigger scale to measure pull weight.
AccuTrigger Basics and Anatomy
The AccuTrigger features a modular design with a set of components that together dictate its pull and reset characteristics. Understanding these components is key to adjusting your trigger.
Key AccuTrigger components include:
- The Hammer Module, which determines the firing pin drop weight.
- The Trigger Bar, responsible for sear engagement and safety functions.
- The Trigger Spring, which impacts pull weight.
- The Hammer Spring, which affects reset.
- The Oversized Safety Lever, offering instant and secure safety for both left and right-handed shooters.
Adjusting Pull Weight
Adjusting the pull weight involves manipulating the trigger spring's tension. The lighter the pull, the easier the trigger. Heavier pull weights offer better safety, especially for home defense situations.
To adjust:
- Disassemble your AccuTrigger to reveal the trigger spring;
- Use the Allen wrench to turn the adjustment screw clockwise for a heavier pull or counterclockwise for a lighter pull. Each full turn roughly adds or subtracts 1 lb of pull weight;
- Test your trigger after each adjustment. Be careful not to over-adjust and increase pull weight above 4 lbs.
Adjusting Reset
The trigger reset impacts the firing cadence. A shorter reset allows for quicker follow-up shots. Adjusting reset involves changing the tension of the hammer spring.
To adjust:
- Identify the hammer spring adjustment screw;
- Using the small flathead screwdriver, turn the screw clockwise for a lighter, shorter reset or counterclockwise for a heavier, longer reset;
- Test your trigger after each adjustment. Avoid resets shorter than 0.25 inches to retain safety.
Advanced AccuTrigger Adjustments
For enhanced fine-tuning, AccuTrigger offers further adjustments like safety settings and firing pin drop weight. These adjustments require more expertise and should only be attempted by experienced shooters.
To adjust these settings, consult the TriggerTech 'Advanced Adjustment Guide'. Always prioritize safety over performance in such delicate adjustments.
Zero-L Ether Push Pin Adjustment
The Zero-L Ether Push Pin can optimize your trigger's pull weight and smoothness. It should be adjusted after setting the pull weight and reset.
To adjust:
- Push the pin slightly left or right using a small, flat-bladed tool;
- Test your trigger and adjust until smooth, consistent pull is achieved CRSุน
Installation and Reassembly
After adjustments, reinstall your AccuTrigger, ensuring all components are correctly assembled. Verify your trigger's functioning and make final adjustments if necessary.
Properly adjusted, your AccuTrigger will provide a smoother, safer, and more accurate shooting experience. Regularly inspect and maintain your trigger for longevity and optimal performance.
Embarking on this journey of AccuTrigger adjustment may initially seem daunting. However, armed with the right knowledge and tools, you can transform your firearm's performance dramatically. So, dive in, experiment, and revel in the precision craftsmanship of your AccuTrigger.