how to adjust a s&s super e carburetor

How to Adjust an S&S Super E Carburetor

By Kevin Young
AD

The S&S Super E carburetor is a high-performance component found in many classic and muscle cars, as well as modern hot rods. Maintaining and adjusting this carburetor is crucial for optimal engine performance. In this guide, we'll walk you through the process of adjusting your S&S Super E carburetor, ensuring both safety and efficiency.

Before we dive into the details, remember that carburetor adjustments should be done on a warmed-up engine in an open, well-ventilated area. Always consult your vehicle's repair manual for specific recommendations and to confirm that these steps apply to your model.

Understanding Your S&S Super E Carburetor

The S&S Super E is a popular four-barrel carburetor often used in vintage and high-performance applications. It features a progressive linkage system that offers excellent drivability and power across all RPM ranges. Familiarizing yourself with its components will help you better understand how to adjust it.

AD
S&S Super E Carburetor 101: Disassembly, Walk Through and Tuning
S&S Super E Carburetor 101: Disassembly, Walk Through and Tuning
Adjusting an SU carburettor
Adjusting an SU carburettor
Adjusting an SU carburettor
Adjusting an SU carburettor

Key components to recognize include the idle mixture screws, idle speed screw, accelerator pump, and power valves. These parts play crucial roles in the carburetor's operation and are the primary adjustments you'll make during tuning.

Adjusting the Idle Mixture Screws

The idle mixture screws control the idle speed and determine whether the engine runs lean (too much fuel) or rich (too little fuel). They are typically located on the side of the carburetor, near the throttle body. To adjust, loosen the lock nut slightly and use an adjustable wrench or pliers to turn the screw clockwise or counterclockwise.

SU carburettor Baseline & Initial Adjustments
SU carburettor Baseline & Initial Adjustments
Carburetor Rebuild: A Full Video Series
Carburetor Rebuild: A Full Video Series

Start by turning the screw out (counterclockwise) to create a lean mixture. Then, slowly turn it in (clockwise) until the engine begins to meander and smooth out. Back it out one full turn, and you've set your idle mixture. Always adjust both screws simultaneously for balanced performance.

Setting the Idle Speed

The idle speed screw dictates how fast your engine idles when the throttle is closed. Located on the front of the carburetor, it's usually marked with an "I." To adjust, use a flathead screwdriver to turn the screw clockwise or counterclockwise. Start with the engine warmed up and your foot off the pedal. Gradually turn the screw to achieve your desired idle speed.

AD

Most applications aim for an idle speed between 800 and 1200 RPM, but consult your vehicle's repair manual for specific recommendations. Once set, confirm your idle speed using a tachometer and adjust as needed.

Fine-Tuning for Power and Acceleration

After setting your idle, it's time to fine-tune your carburetor for optimal power and acceleration. This process involves adjusting the accelerator pump and power valves, ensuring your engine gets the correct amount of fuel throughout the RPM range.

Before adjusting, ensure your spark plugs are in good condition and your engine's timing is correctly set. This will give you a solid foundation for optimizing performance.

AD

The Accelerator Pump

The accelerator pump provides an additional shot of fuel to the engine during acceleration, helping to smooth out power delivery. Located on the side of the carburetor, it can be adjusted using a small screwdriver or the appropriate tool from your S&S tuning kit.

With the engine at a fast idle (around 2000 RPM), gradually increase the pump shot by turning the adjustment screw clockwise. Monitor your engine's performance, and listen for any hesitation or stumbling. Once you've found the sweet spot, back off the adjustment slightly to prevent over-richening.

Power Valves

Power valves meter fuel flow through the secondary barrels, optimizing performance at higher RPMs. They are typically located on the top of the carburetor, near the butterflies. To adjust, use an appropriate tool (usually a flathead screwdriver or a specialized tool from S&S) and turn the valve clockwise or counterclockwise.

AD

With the engine running at a fast idle, gradually open the power valves by turning them clockwise. Listen for any decrease in engine performance, and back off slightly to ensure smooth operation. Repeat this process until you achieve the desired results, being cautious not to over-adjust.

Congratulations, you've successfully adjusted your S&S Super E carburetor! Regular tune-ups and adjustments will help maintain your engine's performance and efficiency. Always consult your vehicle's repair manual for specific recommendations and address any concerns with a professional technician if needed. Happy wrenching!

AD