Adjusting Your Fontaine Fifth Wheel: A Comprehensive Guide
Adjusting a fontaine fifth wheel to ensure it's level and secure is a crucial step for a comfortable and safe towing experience. This comprehensive guide walks you through the process, from checking your leveling system to adjusting your wheels for a perfect fit. Let's get started!
Before you begin, make sure your Fontaine fifth wheel is on a relatively flat surface and you have your manufacturer's instructions handy. The process may vary slightly depending on your specific model, but the basic principles remain the same.
Understanding and Checking Your Slide and Leveling System
The Fontaine slide and leveling system is designed to help you adjust your fifth wheel easily. Familiarize yourself with the components and ensure everything is functioning correctly before use.
Inspect your jack system and hydraulic fittings for any signs of wear or damage. Test the slide system to make sure it operates smoothly. If any components seem faulty, contact a professional for maintenance or repairs.
Checking the Hitch Position
Begin by checking if your fifth wheel hitch is properly positioned on your truck bed. The hitch should be parallel to the rear axle and centered. Use a tape measure to ensure it's perfectly aligned.
If the hitch is not in the correct position, use the built-in "sliders" on your hitch to manually adjust it until it's centered. A properly positioned hitch is the foundation for a well-adjusted fifth wheel.
Checking and Adjusting the Jacks
Next, examine your landing gear or jack system. The goal is to have all four jacks at the same height. Lower or raise each jack using the manual crank or automatic controls until they're level.
Double-check that the jack pads are positioned correctly, providing even distribution of weight and preventing damage to yourtruck bed and fifth wheel. If one side feels softer or the fifth wheel seems tilted, adjust the jacks accordingly until it's level.
Landing Gear and Leveling Techniques
Now that you've checked and adjusted your jacks, it's time to use the landing gear for optimal leveling. Fontaine fifth wheels are equipped with automatic, manual, or a combination of both leveling systems.
For manual systems, follow your manufacturer's instructions to extend and retract the landing gear until your trailer is level. For automatic systems, engage the leveling mode and allow the system to self-level the trailer.
Front-to-Back Leveling
The most common method of leveling is front-to-back, which involves extending or retracting the landing gear to adjust the height of your fifth wheel. Start by crucially ensuring your truck bed is level to minimize the need for extensive adjustments.
To level front-to-back, observe the bubble level on your trailer or use a level app on your smartphone. Extend or retract the landing gear until the bubble is perfectly centered, indicating a level position. If your trailer has a slide system, make sure it's fully extended or retracted for a solid foundation.
Side-to-Side Leveling
After front-to-back leveling, you may still need to make side-to-side adjustments. This can be done by lowering or raising the appropriate side of your trailer using the manual cranks or automatic controls.
It's essential to make small, incremental adjustments and recheck the level frequently to avoid overcompensating. Once you've achieved the desired level, secure the jacks according to your manufacturer's guidelines. Make sure the jacks are fully retracted and stored correctly to prevent damage and ensure a safe ride.
Hitch Adjustment and Alignment
Proper hitch alignment is critical for safe towing and is often overlooked. A misaligned hitch can cause excessive wear, damage, and unsafe driving conditions. Inspect your hitch for proper alignment regularly and make adjustments as necessary.
First, ensure the fifth wheel hitch jaw is centered on the king pin. Next, verify that the hitch is correctly aligned with the truck's rear axle. If the hitch is out of alignment, adjust the sliding system to realign the hitch with the truck's rear axle and king pin.
Pivoting and Turning Precision
Proper hitch alignment also affects your trailer's pivoting and turning precision. An incorrectly aligned hitch can result in poor handling, increased tire wear, and even jackknifing. To check pivoting and turning precision, slowly pull forward and reverse with your trailer attached to ensure smooth, responsive movements.
If your trailer feels stiff or doesn't turn smoothly, it may be an indication of misalignment. Recheck your hitch alignment and make adjustments as necessary. Keep in mind that even minor misalignments can cause significant issues over time, so it's essential to be vigilant about maintaining proper hitch alignment.
Regularly inspecting and adjusting your Fontaine fifth wheel ensures a safe, stable, and comfortable towing experience. By following these guidelines, you'll be well on your way to becoming a confident fifth wheel owner and enjoying worry-free travels. Happy trails!