How to Add Sides to Your Utility Trailer
Ever felt like your utility trailer is missing something? Perhaps it's the perfect side rails or a utc side kit to make it more functional? Adding sides to your utility trailer can increase its usability, security, and aesthetics. Here's a comprehensive guide on how to add sides to your utility trailer in a step-by-step, SEO-optimized manner.
Before we dive into the process, ensure you have the correct tools and materials, including a utility knife, tape measure, drill, screws, side kit or rails, and safety gear. Let's begin!
Choosing Your Sides
Before we start, it's crucial to choose the right sides for your trailer. This depends on your trailer's size, type, and the kind of cargo you'll be carrying. Here are two key aspects to consider:
Side Rails vs. Full Sides
Side rails are ideal if you primarily carry large, flat items and want quick and easy access. They are usually lightweight, making them easy to install and remove. On the other hand, full sides provide more security and protection for your cargo, but they can be heavier and more time-consuming to install.
Consider your trailer's capacity, the type of cargo, and how often you might need to remove the sides for your specific needs.
Material Considerations
The material of your sides plays a significant role in their durability and weight. Aluminum is lighter and more corrosion-resistant, while steel offers excellent durability and strength. Wood, though traditional, is more susceptible to rot and requires occasional maintenance.
Select the material that best balances weight, durability, and cost based on your trailer's usage.
Installing Your Chosen Sides
Once you've decided on the type and material of your sides, it's time to install them. The process differs slightly between side rails and full sides, so we've outlined each method below.
Installing Side Rails
1. Measure the length of your trailer's bed to ensure the side rails fit perfectly.
2. Using a utility knife, mark the spots where you'll install the rails. Typically, these are located at the top and bottom of the trailer bed.
3. Drill pilot holes at the marked spots, and use the appropriate screws provided with your side rail kit to secure the rails in place.
4. Align the rails with the drilled holes and secure them using the screws. Ensure they are level and properly secured to prevent rattling during transport.
Installing Full Sides
1. Carefully unfurl the full side kit and align it with the length of your trailer bed.
2. Again, use a utility knife to mark the spots where you'll install the kit. These will be along the bed's perimeter and at the trailer's corners.
3. Following the kit's instructions, drill pilot holes at the marked spots and secure the side kit using the provided screws or bolts.
4. Check that all edges are properly aligned and sealed to prevent water intrusion. Ensure the sides are level and reinforced at the corners for added stability.
Congratulations! You've successfully added sides to your utility trailer. With proper maintenance and care, your newly customized trailer will serve you well for many years to come.
Remember, when not in use, invest in a quality utility trailer cover to protect your trailer and its new sides from the elements. Happy hauling!