how to add cable outlet

Easy Steps to Add a Cable Outlet: DIY Guide

By Hannah Johnson
AD

Adding a cable outlet, also known as a power outlet or electrical outlet, might seem like a daunting task, but with the right tools and knowledge, it's a manageable DIY project. Not only will you increase the functionality of your space, but you'll also enhance your home's overall value. Let's dive into the step-by-step process of how to add a cable outlet, ensuring safety and efficiency throughout.

Before we begin, it's crucial to understand that working with electricity should always be approached with caution. If you're unsure about any aspect of this process, consult a licensed electrician. Now, let's equip ourselves with necessary tools and materials, and then embark on our outlet installation journey.

Tool and Material Gathering

To ensure a smooth process, gather all the required tools and materials beforehand. A minimal toolkit includes:

AD
an empty room with the words how to add an outlet in 50 seconds on it
an empty room with the words how to add an outlet in 50 seconds on it
an electrical wiring diagram with two wires connected to the ground and one wire that is plugged in
an electrical wiring diagram with two wires connected to the ground and one wire that is plugged in
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
How to Wire an Outlet from Another Outlet (2 Methods & Steps)
  • A voltage tester to ensure safety
  • A retractable flashlight to see inside walls
  • Wire stripper to expose the inner wires
  • A utility knife for cutting drywall
  • Wire nuts to connect wires
  • Cable (non-metallic ( NM) or armored (BM) electrical cable)
  • Outlet box (new work or old work, depending on your wall setup)
  • Electrical outlet (duplex receptacle)

Safety First: Turn Off Power and Test

Always prioritize safety when dealing with electricity. Begin by locating your home's main electrical panel and turning off the power to the room where you'll be working. Use a voltage tester to ensure all wires are indeed dead before proceeding.

Once the power is off, test the outlet where you'll be adding the new one using a voltage tester. Check if the power has been disconnected, and if any wires are still hot.

DIY Cable Outlet
DIY Cable Outlet
DIY Cable Installation
DIY Cable Installation

Plan Your Outlet Location

Carefully select the desired position for your new outlet. Consider the room's layout, furniture placement, and where electrical appliances will be used. Utilize an outlet box that is appropriate for your wall's construction - new work (for open walls) or old work (for finished walls).

Measure and mark the outlet's precise location, ensuring it's 12" - 16" above the finished floor for most rooms, but 4" for countertops, and allow for proper cable grounding and wire bending.

AD

Creating an Access Hole

With the location determined, it's time to create an access hole in the drywall. Using a utility knife, score along your marked lines. Then, carefully cut out the drywall using a drywall saw or reciprocal saw, creating a rectangular hole slightly larger than your outlet box.

Peek inside the wall using your flashlight to locate existing framing and ensure you're not cutting into any pipes or other obstructions.

Preparing the Wiring and Outlet Box

Run your cable (NM or BM) from the nearest existing outlet or junction box to the new location. Ensure the cable is properly supported and doesn't have any bends less than 1" in radius. Strip the cable sheathing with a utility knife, exposing about 8" of inner wires.

AD

Strip the outer insulation of the individual wires, exposing about 3/4" of the inner copper conductors and one end of the ground wire. Twist the ends of these exposed wires tightly with wire nuts, connecting the white (neutral) and black (hot) wires together, and the green or bare (ground) wire separately.

Installing the Outlet Box and Outlet

Install the outlet box into the access hole, securing it with screws or nails through the provided hardware clips. Ensure the box is safely and securely attached to the framing, with cable clamps to secure the wiring entering and exiting the box.

Attach the electrical outlet (duplex receptacle) to the outlet box using the provided screws. Feed the connected wires into the outlet, ensuring the black (hot) wire goes to the brass screws, the white (neutral) wire goes to the silver screws, and the ground wire is connected properly. Tuck excess wires inside the box and secure the outlet's faceplate.

AD

Testing the New Outlet

After installing the outlet, it's crucial to test it to ensure everything works correctly and safely. Restore power at the main electrical panel, then use a voltage tester to check each hot, neutral, and ground wire at the new outlet. If everything checks out, your new cable outlet is ready for use!

In the event that you're not comfortable with any aspect of this process, it's essential to involve a professional licensed electrician. Safety is paramount when working with electricity, and a qualified electrician can ensure your new outlet installation meets all electrical codes and standards.

Congratulations! You've successfully added a new cable outlet to your home. With your newfound knowledge, you can now tackle other DIY electrical projects, enhancing your living space and adding value to your home. Always remember to prioritize safety, and never hesitate to seek professional help when needed.

AD