How to Access BIOS on ASUS Computers: A Step-by-Step Guide
Accessing the BIOS on an ASUS computer is a crucial step when diagnosing issues or making configuration changes. BIOS, or Basic Input/Output System, is a firmware used to initialize hardware components during the booting process. ASUS computers often use the well-regarded UEFI (Unified Extensible Firmware Interface) instead of traditional BIOS. Here's a step-by-step guide on how to access the BIOS or UEFI on your ASUS computer.
Before proceeding, make sure you have completely shutdown your computer. Accessing the BIOS/UEFI requires you to interrupt the boot process, and it's easier to do this from a cold boot.
Accessing BIOS/UEFI During Boot
The most common method to access the BIOS/UEFI is during the boot process. ASUS computers typically use the Esc key, but some models may use Del or another key. Here's how to do it:
Using Esc Key (Most ASUS Models)
Upon startup, quickly and repeatedly press the Esc key. The system will display a message saying "Press [Esc] to setup." Continue holding the key until you see the BIOS or UEFI interface.
If pressing Esc doesn't work, try other function keys like Del, F2, F10, or F12. Some ASUS models use these keys instead.
Using Other Function Keys (ASUS Models)
Some ASUS models use function keys to access BIOS/UEFI. During startup, press and hold the key indicated on the screen, usually Del, F2, F10, or F12. Keep holding the key until the system stops booting and displays the BIOS/UEFI interface.
For example, if the message "Press Del to enter Setup" appears, keep pressing the Del key until you see the BIOS/UEFI interface.
Accessing BIOS/UEFI via Windows
If you're unable to access the BIOS/UEFI during boot, or if your system won't boot, you can use the following method within Windows. Make sure you've already tried the above methods before proceeding with this one.
Using the Command Prompt
Press the Windows key + R to open the Run dialog box. Type 'msconfig' and press Enter. In the System Configuration window, go to the Boot tab and click on "Boot options". Check "Make all boot devices No-EUl" and launch any operating system". Click OK and restart your computer.
Upon restart, attempt to access the BIOS/UEFI using the instructions above. If that still doesn't work, restore the boot options in the System Configuration window and try again while holding down the power button for 10 seconds, then release it and press the power button again.
Successfully accessing the BIOS/UEFI on your ASUS computer is a significant step in troubleshooting or configuring your system. Always remember to exit the BIOS/UEFI safely and save any changes you've made to prevent damaging your system.