Brownie Target Six-20: Easy Steps to Open
Attempting to open a Brownie Target Six-20 can be a bit challenging due to its unique design. If you're wondering how to open this concealed carry handgun, you're in the right place. This comprehensive guide will walk you through the process, ensuring safety and proper handling.
Before we dive in, remember that gun safety should always be your top priority. Keep your firearm pointed in a safe direction, your finger off the trigger until you're ready to shoot, and always treat every gun as if it's loaded and ready to fire. Now, let's get started.
Understanding the Brownie Target Six-20
The Brownie Target Six-20 is a compact, semi-automatic pistol designed for concealed carry. It's known for its unique, single-action-only mechanism, which can make the opening process a bit different from other handguns. Let's explore its main features before delving into the opening process.
The Six-20 is chambered in .204 Ruger, a powerful, high-velocity cartridge ideal for self-defense and small game hunting. It has a 6+1 capacity, a match-grade barrel, and a low-profile, drift-adjustable rear sight.
Identifying the Disassembly Notches
Before you begin, locate the disassembly notches on either side of the frame, near the rear of the pistol. These notches will allow you to pull the captive pins that hold the slide and barrel in place.
Accessing the Captive Pins
Using a punch or a thick nail, press firmly on the disassembly notch until the captive pin pops out. This process takes a little force, so be patient but firm. It's essential to be careful here, as excessive force can damage the captive pins or the pistol itself.
Once the captive pin has emerged, you can use it to push the recoil spring assembly out of the pistol. The recoil spring assembly includes the recoil spring, spring guide, and barrel link. Be prepared as the spring may pop out with some force.
Opening the Slide and Barrel
Now that you've accessed the captive pins, you can proceed to separate the slide and barrel from the frame. The unique, single-action-only mechanism of the Brownie Target Six-20 uses a different disassembly process than most semi-automatic pistols.
The Six-20's trigger must be pulled to unlock the slide and barrel. To do this, place your finger on the trigger, pull it back slightly, and release it. This action should allow you to slide the barrel and compensator assembly forward off the frame.
Removing the Slide and Barrel
With the barrel assembly unlocked, you can now slide it forward and remove it from the frame. The barrel and compensator are attached to each other and come off as a single unit.
The slide is retained by the ejector, so press down on the ejector to free the slide and allow it to be lifted off the frame. The slide contains the firing mechanism, along with the extractor, ejector, and firing pin.
Cleaning and Maintaining Your Brownie Target Six-20
Having disassembled your pistol, you can now proceed with a thorough cleaning to remove any fouling or debris that may have accumulated in the mechanism.
Using a quality gun cleaner and lubricant, clean each component of the pistol, ensuring that no debris or old lubricant remains. Pay special attention to the barrel, chamber, and firing mechanism.
With your pistol clean and maintained, it's time to reassemble it. Reassembly is the reverse of disassembly, so follow the process outlined above, paying close attention to the order in which you removed each component. Always ensure that your pistol is unloaded and safe before firing.
Remember, practicing proper gun safety and maintenance is key to extending the lifespan of your Brownie Target Six-20 and ensuring reliable performance. Happy shooting, and always shoot responsibly!