ariens snowblower how to start

Ariens Snowblower: Easy Steps to Start Yours

By Brian Garcia
AD

When winter arrives and dumping snow on your driveway, one of the handiest tools to have is an Ariens snowblower. These powerful machines are designed to handle heavy snowfall and clear your path quickly. To ensure your Ariens snowblower works perfectly, you need to know how to start it correctly. In this comprehensive guide, we'll walk you through the starting process, step by step.

Before you begin, ensure that your Ariens snowblower is on a flat surface. This will prevent any issues with the machine's operation. Additionally, always check the owner's manual for model-specific instructions, as some details may vary.

Prepare Your Ariens Snowblower

Before you start your Ariens snowblower, there are a few preparations to ensure a smooth operation.

AD
a man is working on an electric vehicle's battery system with the help of a hand
a man is working on an electric vehicle's battery system with the help of a hand
How To Change The Oil In Your Ariens Snowblower
How To Change The Oil In Your Ariens Snowblower
the front end of a red motorcycle parked in a showroom
the front end of a red motorcycle parked in a showroom

Inspect the Blades

Ariens snowblowers come with high-quality steel blades designed to handle heavy snowfall. However, it's essential to inspect them before each use. Check for any signs of damage or wear and replace them if necessary.

Previously used snowblowers should have had their blades sharpened. If not, you may want to do this before your first use of the season.

an orange snow blower sitting on top of a white background
an orange snow blower sitting on top of a white background
How to Start a Snowblower That Has Been Sitting
How to Start a Snowblower That Has Been Sitting

Check the Tire Pressure

Proper tire inflation ensures better traction and overall performance. Check your Ariens snowblower's tire pressure and adjust it according to the manufacturer's recommendations. This is typically listed on a sticker inside the wheel well.

Underinflated tires can cause the snowblower to drift and may damage your driveway. Overinflated tires can lead to reduced traction and inefficient snow clearing.

AD

Fuel Your Ariens Snowblower

Before starting your Ariens snowblower, you need to have fresh gasoline on hand.

Understand Gasoline Requirements

Ariens snowblowers require fresh, unleaded gasoline with an octane rating of at least 89. Never use gasoline with an ethanol content higher than 10%. Always use gasoline that is less than 30 days old to prevent fuel degradation.

If you're storing your snowblower for a long period, use a fuel stabilizer to prevent gas from breaking down.

AD

Properly Fill the Fuel Tank

Locate the fuel cap on your Ariens snowblower, usually near the engine. Remove the cap and insert the nozzle of your fuel can into the opening. Fill the tank slowly and evenly to avoid spills.

Once the tank is full, reattach the cap tightly to prevent fuel leakage and ensure the cleanliness of your snowblower.

Start Your Ariens Snowblower

With your Ariens snowblower properly prepared and fueled, it's time to start the engine.

AD

Prime the Machine

Before you attempt to start your Ariens snowblower, you should prime the fuel system. Turn the primer bulb located near the fuel line or carburetor three to four times to fill the fuel system with gasoline.

Be careful not to overprime the system, as too much gasoline can flood the engine and prevent it from starting.

Begin the Starting Process

Sit on the snowblower's operator seat and engage the parking brake. Hold the safety handle firmly to prevent your hands from getting close to moving parts.

Engage the choke lever fully to the 'Choke' position. This enriches the fuel-air mixture, making it easier to start the engine in cold weather. Pull the starter rope gently but firmly until the engine sputters to life. Once the engine starts, release the choke lever slowly to allow the engine to warm up and stabilize.

Post-Start Care

After successfully starting your Ariens snowblower, there are a few maintenance tasks to keep your machine in top condition.

Warm-Up the Engine

Allow the engine to run for a few minutes to ensure it reaches its optimal operating temperature. This warms up the crankcase oil, providing better lubrication for the moving parts. While the engine is warming up, you can use this time to adjust your seat and get comfortable with the controls.

After the engine has warmed up, you can begin clearing the snow.

Regular Cleaning and Maintenance

After each use, clean your Ariens snowblower thoroughly to remove any snow, ice, or debris. Regular cleaning prevents corrosion and ensures that your snowblower remains in good working condition.

Additionally, perform routine maintenance tasks such as changing the oil, checking the air filter, and inspecting the belts and auger system. Regular maintenance keeps your snowblower running efficiently and prolongs its lifespan.

And there you have it – a comprehensive guide on how to start your Ariens snowblower. By following these steps and adhering to regular maintenance, your Ariens snowblower will serve you well during those cold winter months. Happy snow clearing!

AD